http://papers.xtremepapers.com/CIE/...nd AS Level/Physics (9702)/9702_w11_qp_53.pdf
how do I get the un-certainity for v^2? in question2
really need someones help O
how do I get the un-certainity for v^2? in question2
really need someones help O
We are currently struggling to cover the operational costs of Xtremepapers, as a result we might have to shut this website down. Please donate if we have helped you and help make a difference in other students' lives!
Click here to Donate Now (View Announcement)
how to draw the error bars when the errors are in x-axis??? will the error bars be horizontal????in that case,will the worst acceptable line be drawn from the extreme right error of the first point to the xtreme left error of the last point????? PLZ REPLY ASAP....
error bars will be horizontal n u draw two worst acceptable lines frm right to left and left to right n chose d one dat is most deviated frm d best fit line.
u got it?
inna gussa
kyun kyun
gussa lag raha hai..wait i'll edit..but dats rit ?
yup dts ryt!!gussa lag raha hai..wait i'll edit..but dats rit ?
yup dts ryt!!
Trash Can yes d error bars will be horizontal ....everythng will b d same ....even wen u draw d worst fit lines....choose d one wich is d most deviated..as sumi said
sumaiyarox:) gt it???
y so angry hain?
Q13
torque with 0.1m=3Nm,so by cross multiplying find torque with 0.15m,that is=4.5Nm.
then find force for both the torques by F=torque/diameters in metres....
add both the forces ,that's equal to tension.
Q15
mass is inversely propotional to velocities,
so if velocity of 2kg trollry =2m/s then velocity of 1 kg=4m/s
find out the kinetic energy of both trolleys by using 0.5mv2
and add both kinetic energies.
Q22
find cross sectional area of wire using 2pi(0.00025)
the assume original length as any number like 2m
then by using stress=force/area find stress
and then apply formula of youg modulus =stress x original length/extension to find extension...
then( extension/original length+ extension)x 100
hope it helped.
what is the name of cie endorsed book ?? thnx
Anyone can help me, please:
Q23:
http://papers.xtremepapers.com/CIE/Cambridge International A and AS Level/Physics (9702)/9702_w07_qp_1.pdf
Q6
http://papers.xtremepapers.com/CIE/Cambridge International A and AS Level/Physics (9702)/9702_s08_qp_1.pdf
Q11 VERY SERIOUS DOUBT
http://papers.xtremepapers.com/CIE/Cambridge International A and AS Level/Physics (9702)/9702_w08_qp_1.pdf
Q3
http://papers.xtremepapers.com/CIE/Cambridge International A and AS Level/Physics (9702)/9702_s09_qp_1.pdf
Q23
first find frequency of wave using f=speed/wavelength that is = 6.25Hz
then find speed of particle P=2 x 2(amplitude)x pi x 6.25
then use formula of kinetic energy to find max K.E that will be 0.00404J=4.04mJ
Q6
obviously if we apply force perpendicular to the direction of motion,the direction would change bt since no force is applied parallel to motion,the there will be no change in speed.....
Q11
first find out force produced by mass,F=2 x 9.81=19.62N
find out the resultant force acting on the block by F =19.62-6=13.62N
hence acceleration of block=resultant force/total mass=13.62/10=1.362=1.4m/s2
Q3
just find change in temperature using Final -initial=14-(-6.5)=20.5C
When drawing error bars how long do the error bars have to be? Do each of the length of the error bars depend on their uncertainty or are all the same length?
Also, how do you draw the worst line of best fit??
Please help, this is emergency!
For almost 10 years, the site XtremePapers has been trying very hard to serve its users.
However, we are now struggling to cover its operational costs due to unforeseen circumstances. If we helped you in any way, kindly contribute and be the part of this effort. No act of kindness, no matter how small, is ever wasted.
Click here to Donate Now