Tips for Chemistry Practicals (P3)

[snowbrood]

I'm not sure when you guys have the paper but BEST OF LUCK!
May Allah help you and us all. I'm giving AICT full A Levels from scratch this month so pray for me

i cant figure the test of oxygen with match sticks there is not really much happening i dont see difference when i put the match into the tube can u tell me what to do

 

[Alice123]

i cant figure the test of oxygen with match sticks there is not really much happening i dont see difference when i put the match into the tube can u tell me what to do

they dont give matchsticks for testing

 

[snowbrood]

they dont give matchsticks for testing

no seriously is there anything wrong with matchsticks and what if they do are u from pak

 

[Alice123]

no seriously is there anything wrong with matchsticks and what if they do are u from pak

no im not frm pak, matchsticks are too small to observe relighted glowing splint.... They give a splint that's long enuf to make observations... its the same everywhere

 

[mohammed yasser]

Any One Here 31

 

[white rose]

Aaaawweessomme....it helped a lot..thnx

 

[snowbrood]

no im not frm pak, matchsticks are too small to observe relighted glowing splint.... They give a splint that's long enuf to make observations... its the same everywhere

now i wonder how come i never observed relighter glowing matches hahaha

 

[talhanoor44]

please upload the pics

 

[Ammar Naeem]

*Edited*

 

[S.Mashaal.N]

*Edited*

what variant??? this must b 32 ryt? how cn dere b titration? :/
p.s. there is no graph in the ppr u asked to chk out :|

 

[Es Jay]

Aoa wr wb!

Quote from the syllabus:

View attachment 9094

what about the uncertainties regarding the use of stopwatch?

 

[Ammar Naeem]

what variant??? this must b 32 ryt? how cn dere b titration? :/
p.s. there is no graph in the ppr u asked to chk out :|

It was variant 34! Dont know about 32

 

[S.Mashaal.N]

It was variant 34! Dont know about 32

ah ok! ^_^

 

[Annabelle how]

Can yiu tell me how to recognise a gas hough the way it efferverces?

• Just keep you mind cool and read everything on the paper, mostly students just don't read long paragraphs of text carefully. Practicals are not that hard so try to score most here, the best solution to this is try as many practicals as many possible.
• Don't perform unnecessary titrations, if you did two and got results close to each other then there's no need for a third one.
• Always draw a triangle on the graph to find the gradient, if you are asked to find it.
• Latest salt analysis sections contain a trick with aluminium and lead(II) ions because they have the same results with ammonia and sodium hydroxide. The test that distinguished them is addition of HCL, it will form a precipitate with lead(II) ions but not with aluminum ions. (Lead(II) ions can be distinguished from aluminium ions by the insolubility of lead(II) chloride.)
• Always read carefully the names of the solutions before working with them, 1 small mistake and you might have to start from the beginning.
• Always heat solutions in a boiling tube and not the test tube.
• Make sure the burette is closed before adding solutions to it.
• If you're quick at experiments then I recommend washing the apparatus with distill water before using.(But only if you're sure you can complete the experiment in time.)
• Don't spend more than 45 mins on Salt Analysis.
• When you write the observation for some gas that is released, always include a confirmatory test. You should actually never perform these confirmatory tests (to save time) just use your knowledge of chemistry to find which gas is released but always include the test in the observations. E.g. when a carbonate is reacted with an acid, you should write the observation; "Colorless gas released which turns lime water milky."
• Remember some gases are hard to see when released in a test tube, so where you expect some gases to be released, look carefully for the observation. A good idea is to use the white tile or if you're not provided with it then use your paper as the background when looking at the test tube.
• Try to memorize the smell of ammonia. I know its very disturbing to smell it but you need to identify it from others when they ask you so just smell it enough that you can distinguish it form other gases.
• In the paper you want both speed and accuracy, so do the easy parts fast like pouring solutions and stuff and use the time saved on important parts like observing changes and stuff.
• In the exam if you think some solution has some impurity or you put something into it by mistake then just ask them to replace it, don't use it.
• Remember to not to use the same dropper for two different solutions.
• If some solution involves heating and then heating strongly then you really need to heat it strongly so don't write no change too fast.
• Always wash the thermometer before using, and make sure its working before using, when not dipped into any solution, it should give a constant reading of 25-30 °C.
• Some solutions need shaking to mix them and sometime you will need to shake it really hard to work it out. Just wash your hands and close the top of the test-tube with your thumb and shake.
• Be careful with the amount of solutions you use, you need to finish all the experiments in the amount of solutions provided don't think that you can get more if you're empty because some examiners might be strict.
• Try to work in a clean and objective oriented environment, what I mean is when you're working with 1 part of the paper then just keep the solutions needed for that part to yourself and keep the others away. This helps a lot.
• Always draw tables(similar to how they give you in the questions) to represent results and observations, don't just write them down in lines.
• One last thing and this is really important; understand the question before doing it, if you can't then try drawing diagrams on a paper to help you visualize what you are going to do and if you still don't get it then skip that part you can do it in the end unless it is related to any other part, if so then just try to copy whatever is instructed in the question.

If you have anything else to add feel free to do so. =)

EDIT [24/05/2012]​

Tips for drawing the graphs:

• Think carefully before choosing scales for the axes, you need to keep in mind that the scale needs your values to cover at least half of the page and should is sensible, by that I mean you should be able to easily find values on the axes without needing to calculate what value some point on the axes represent.
• Sharp your pencil, the last thing you want is to lose marks because your line was too thick.
• Double check when marking the points, 1 mistake and in some cases you might mess up the whole graph.
• "Line of best fit." Doesn't necessarily mean that its a straight line. Although rarely, it could be a curve too that fits most of the points.
• In graphs of experiments like heating and then cooling, you need to draw two lines, 1 representing cooling and the other one representing heating instead of a curve.
• Whenever they ask you to find gradient, ALWAYS draw a triangle, and the bigger the triangle, the more accurate your gradient.
• If you have doubt about your gradient, just take any point that is close to the line and find (y/x), this value should be very close to the gradient found using the triangle. But remember this only works when the graph is starting from origin or near it.
• Try to never break your graph but if you do, REMEMBER that the y-intercept needs to be calculated using the equation "y = mx + c" where m is the gradient you found, c is the y-intercept and can be found using the y and x value of any point on the lane.
• Try to keep your graph clean and visible. If you need multiple lines to find gradient and other value, make sure they're distinguishable.
• ALWAYS write what each axis represents with its unit.
• To determine which quantity goes on the x and y axis, you need to find which quantity is dependent and which one is independent. Independent is usually the one you are changing and dependent is the one you measure.
• If you draw multiple graphs, make sure to label them.
• Don't spend more than 15 minutes on the graph. The graph is usually simple, and if its not then you've done probably something wrong and instead of wasting time on it, try to score marks in other parts first and then come in the end to figure out what's the problem with the graph.
• If you're good at salt analysis, then do it first and finish it fast so you can do the graphing without any tension.
• REMEMBER even if you draw the graph wrong due to some wrong measurements or something, don't lose hope on it, you can still workout the rest of the questions for the wrong graph and score most of those marks like gradient and stuff.
• When they ask you to prove some relationship like T=kV or something, write that since the graph is a straight line, the value of the K is constant and therefore the relationship is true...unless emm...your line is not straight.
• If you don't have time to draw the graph, try to do as much as you can like plotting two or three values and then making the line instead of all the points or even writing the quantities on the axes can gain your marks.

 

[Nisa Mirza]

Awesome notes man. So what about the degree of accuracy that should be used for the answers e.g titrations are mostly given to 2 decimal places and thats like 4 s.f ; but then if they ask us to maybe 'state the volume needed for that and that' and we have to write the mean of titres, do we still give it to 2 decimals or 3 s.f as its a common practice?

 

[kartsahi]

• Just keep you mind cool and read everything on the paper, mostly students just don't read long paragraphs of text carefully. Practicals are not that hard so try to score most here, the best solution to this is try as many practicals as many possible.
• Don't perform unnecessary titrations, if you did two and got results close to each other then there's no need for a third one.
• Always draw a triangle on the graph to find the gradient, if you are asked to find it.
• Latest salt analysis sections contain a trick with aluminium and lead(II) ions because they have the same results with ammonia and sodium hydroxide. The test that distinguished them is addition of HCL, it will form a precipitate with lead(II) ions but not with aluminum ions. (Lead(II) ions can be distinguished from aluminium ions by the insolubility of lead(II) chloride.)
• Always read carefully the names of the solutions before working with them, 1 small mistake and you might have to start from the beginning.
• Always heat solutions in a boiling tube and not the test tube.
• Make sure the burette is closed before adding solutions to it.
• If you're quick at experiments then I recommend washing the apparatus with distill water before using.(But only if you're sure you can complete the experiment in time.)
• Don't spend more than 45 mins on Salt Analysis.
• When you write the observation for some gas that is released, always include a confirmatory test. You should actually never perform these confirmatory tests (to save time) just use your knowledge of chemistry to find which gas is released but always include the test in the observations. E.g. when a carbonate is reacted with an acid, you should write the observation; "Colorless gas released which turns lime water milky."
• Remember some gases are hard to see when released in a test tube, so where you expect some gases to be released, look carefully for the observation. A good idea is to use the white tile or if you're not provided with it then use your paper as the background when looking at the test tube.
• Try to memorize the smell of ammonia. I know its very disturbing to smell it but you need to identify it from others when they ask you so just smell it enough that you can distinguish it form other gases.
• In the paper you want both speed and accuracy, so do the easy parts fast like pouring solutions and stuff and use the time saved on important parts like observing changes and stuff.
• In the exam if you think some solution has some impurity or you put something into it by mistake then just ask them to replace it, don't use it.
• Remember to not to use the same dropper for two different solutions.
• If some solution involves heating and then heating strongly then you really need to heat it strongly so don't write no change too fast.
• Always wash the thermometer before using, and make sure its working before using, when not dipped into any solution, it should give a constant reading of 25-30 °C.
• Some solutions need shaking to mix them and sometime you will need to shake it really hard to work it out. Just wash your hands and close the top of the test-tube with your thumb and shake.
• Be careful with the amount of solutions you use, you need to finish all the experiments in the amount of solutions provided don't think that you can get more if you're empty because some examiners might be strict.
• Try to work in a clean and objective oriented environment, what I mean is when you're working with 1 part of the paper then just keep the solutions needed for that part to yourself and keep the others away. This helps a lot.
• Always draw tables(similar to how they give you in the questions) to represent results and observations, don't just write them down in lines.
• One last thing and this is really important; understand the question before doing it, if you can't then try drawing diagrams on a paper to help you visualize what you are going to do and if you still don't get it then skip that part you can do it in the end unless it is related to any other part, if so then just try to copy whatever is instructed in the question.

If you have anything else to add feel free to do so. =)

EDIT [24/05/2012]​

Tips for drawing the graphs:

• Think carefully before choosing scales for the axes, you need to keep in mind that the scale needs your values to cover at least half of the page and should is sensible, by that I mean you should be able to easily find values on the axes without needing to calculate what value some point on the axes represent.
• Sharp your pencil, the last thing you want is to lose marks because your line was too thick.
• Double check when marking the points, 1 mistake and in some cases you might mess up the whole graph.
• "Line of best fit." Doesn't necessarily mean that its a straight line. Although rarely, it could be a curve too that fits most of the points.
• In graphs of experiments like heating and then cooling, you need to draw two lines, 1 representing cooling and the other one representing heating instead of a curve.
• Whenever they ask you to find gradient, ALWAYS draw a triangle, and the bigger the triangle, the more accurate your gradient.
• If you have doubt about your gradient, just take any point that is close to the line and find (y/x), this value should be very close to the gradient found using the triangle. But remember this only works when the graph is starting from origin or near it.
• Try to never break your graph but if you do, REMEMBER that the y-intercept needs to be calculated using the equation "y = mx + c" where m is the gradient you found, c is the y-intercept and can be found using the y and x value of any point on the lane.
• Try to keep your graph clean and visible. If you need multiple lines to find gradient and other value, make sure they're distinguishable.
• ALWAYS write what each axis represents with its unit.
• To determine which quantity goes on the x and y axis, you need to find which quantity is dependent and which one is independent. Independent is usually the one you are changing and dependent is the one you measure.
• If you draw multiple graphs, make sure to label them.
• Don't spend more than 15 minutes on the graph. The graph is usually simple, and if its not then you've done probably something wrong and instead of wasting time on it, try to score marks in other parts first and then come in the end to figure out what's the problem with the graph.
• If you're good at salt analysis, then do it first and finish it fast so you can do the graphing without any tension.
• REMEMBER even if you draw the graph wrong due to some wrong measurements or something, don't lose hope on it, you can still workout the rest of the questions for the wrong graph and score most of those marks like gradient and stuff.
• When they ask you to prove some relationship like T=kV or something, write that since the graph is a straight line, the value of the K is constant and therefore the relationship is true...unless emm...your line is not straight.
• If you don't have time to draw the graph, try to do as much as you can like plotting two or three values and then making the line instead of all the points or even writing the quantities on the axes can gain your marks.

GOD=DESIGNER,OWNER,MANAGER,AND EDITOR OF THIS UNIVERSE . WE ARE THE PLAYER'S. I WONDER WE ARE ALL CONNECTED TO A MAINFRAME AND AFTER DEATH ; REAL LIFE WILL BEGIN. I BELIEVE THE WORLD IS A GAME ; GOD IS THE GAME MASTER AND WE ARE THE PLAYERS.

 

[kartsahi]

"EXTREME MAGIC = HACKING" IN THIS GAME OF OUR UNIVERSE.

 

[kartsahi]

• Just keep you mind cool and read everything on the paper, mostly students just don't read long paragraphs of text carefully. Practicals are not that hard so try to score most here, the best solution to this is try as many practicals as many possible.
• Don't perform unnecessary titrations, if you did two and got results close to each other then there's no need for a third one.
• Always draw a triangle on the graph to find the gradient, if you are asked to find it.
• Latest salt analysis sections contain a trick with aluminium and lead(II) ions because they have the same results with ammonia and sodium hydroxide. The test that distinguished them is addition of HCL, it will form a precipitate with lead(II) ions but not with aluminum ions. (Lead(II) ions can be distinguished from aluminium ions by the insolubility of lead(II) chloride.)
• Always read carefully the names of the solutions before working with them, 1 small mistake and you might have to start from the beginning.
• Always heat solutions in a boiling tube and not the test tube.
• Make sure the burette is closed before adding solutions to it.
• If you're quick at experiments then I recommend washing the apparatus with distill water before using.(But only if you're sure you can complete the experiment in time.)
• Don't spend more than 45 mins on Salt Analysis.
• When you write the observation for some gas that is released, always include a confirmatory test. You should actually never perform these confirmatory tests (to save time) just use your knowledge of chemistry to find which gas is released but always include the test in the observations. E.g. when a carbonate is reacted with an acid, you should write the observation; "Colorless gas released which turns lime water milky."
• Remember some gases are hard to see when released in a test tube, so where you expect some gases to be released, look carefully for the observation. A good idea is to use the white tile or if you're not provided with it then use your paper as the background when looking at the test tube.
• Try to memorize the smell of ammonia. I know its very disturbing to smell it but you need to identify it from others when they ask you so just smell it enough that you can distinguish it form other gases.
• In the paper you want both speed and accuracy, so do the easy parts fast like pouring solutions and stuff and use the time saved on important parts like observing changes and stuff.
• In the exam if you think some solution has some impurity or you put something into it by mistake then just ask them to replace it, don't use it.
• Remember to not to use the same dropper for two different solutions.
• If some solution involves heating and then heating strongly then you really need to heat it strongly so don't write no change too fast.
• Always wash the thermometer before using, and make sure its working before using, when not dipped into any solution, it should give a constant reading of 25-30 °C.
• Some solutions need shaking to mix them and sometime you will need to shake it really hard to work it out. Just wash your hands and close the top of the test-tube with your thumb and shake.
• Be careful with the amount of solutions you use, you need to finish all the experiments in the amount of solutions provided don't think that you can get more if you're empty because some examiners might be strict.
• Try to work in a clean and objective oriented environment, what I mean is when you're working with 1 part of the paper then just keep the solutions needed for that part to yourself and keep the others away. This helps a lot.
• Always draw tables(similar to how they give you in the questions) to represent results and observations, don't just write them down in lines.
• One last thing and this is really important; understand the question before doing it, if you can't then try drawing diagrams on a paper to help you visualize what you are going to do and if you still don't get it then skip that part you can do it in the end unless it is related to any other part, if so then just try to copy whatever is instructed in the question.

If you have anything else to add feel free to do so. =)

EDIT [24/05/2012]​

Tips for drawing the graphs:

• Think carefully before choosing scales for the axes, you need to keep in mind that the scale needs your values to cover at least half of the page and should is sensible, by that I mean you should be able to easily find values on the axes without needing to calculate what value some point on the axes represent.
• Sharp your pencil, the last thing you want is to lose marks because your line was too thick.
• Double check when marking the points, 1 mistake and in some cases you might mess up the whole graph.
• "Line of best fit." Doesn't necessarily mean that its a straight line. Although rarely, it could be a curve too that fits most of the points.
• In graphs of experiments like heating and then cooling, you need to draw two lines, 1 representing cooling and the other one representing heating instead of a curve.
• Whenever they ask you to find gradient, ALWAYS draw a triangle, and the bigger the triangle, the more accurate your gradient.
• If you have doubt about your gradient, just take any point that is close to the line and find (y/x), this value should be very close to the gradient found using the triangle. But remember this only works when the graph is starting from origin or near it.
• Try to never break your graph but if you do, REMEMBER that the y-intercept needs to be calculated using the equation "y = mx + c" where m is the gradient you found, c is the y-intercept and can be found using the y and x value of any point on the lane.
• Try to keep your graph clean and visible. If you need multiple lines to find gradient and other value, make sure they're distinguishable.
• ALWAYS write what each axis represents with its unit.
• To determine which quantity goes on the x and y axis, you need to find which quantity is dependent and which one is independent. Independent is usually the one you are changing and dependent is the one you measure.
• If you draw multiple graphs, make sure to label them.
• Don't spend more than 15 minutes on the graph. The graph is usually simple, and if its not then you've done probably something wrong and instead of wasting time on it, try to score marks in other parts first and then come in the end to figure out what's the problem with the graph.
• If you're good at salt analysis, then do it first and finish it fast so you can do the graphing without any tension.
• REMEMBER even if you draw the graph wrong due to some wrong measurements or something, don't lose hope on it, you can still workout the rest of the questions for the wrong graph and score most of those marks like gradient and stuff.
• When they ask you to prove some relationship like T=kV or something, write that since the graph is a straight line, the value of the K is constant and therefore the relationship is true...unless emm...your line is not straight.
• If you don't have time to draw the graph, try to do as much as you can like plotting two or three values and then making the line instead of all the points or even writing the quantities on the axes can gain your marks.

YOU WERE VERY HELP FULL BRO.

 

[Dania_Yz]

Any tips for tomorrow's paper 34 exam???

 

[saifeddin]

if only i can like this twice thanks a lot man !
just one question tho.. what is the excess stuff when doing anions and cations.. hw can i kno whether or not a solution disolves in excess or not? i dont understand it :/