• We need your support!

    We are currently struggling to cover the operational costs of Xtremepapers, as a result we might have to shut this website down. Please donate if we have helped you and help make a difference in other students' lives!
    Click here to Donate Now (View Announcement)

Chemistry ATP (Important points for Both IGCSE and O-level)

Nibz

XPRS Moderator
Messages
4,615
Reaction score
9,574
Points
523
Hey guys, Assalam-o-Alaikum!

Tips for Chemistry ATP (both IGCSE and O-level):

Some precautions:
=> Experiments involving poisonous gases like Nitrogen DIOXIDE, Ammonia and Bromine -> Carry out the exp. in Fume Cupboard or in a well Ventilated Room.
=> Experiments involving heat -> Use a polystyrene cup for insulation to prevent heat loss! + Always take the same initial readings for better accuracy;
=> Experiments involving Acids, Liquids or Solids -> Always use the same concentration; Same Volumes; Same Surface Area or Same Masses exceptions are some variables!
=> Experiment involving Crystallisation -> Allow to cool SLOWLY and Use more water and more salt for better results!
SOME COMMON and USEFUL precautions for all experiments (use these when your mind is BLANK)
=> Repetition of the exp.
=>Taking Average > Put your tie in shorts
=> Use Goggles
=> Taking measurements carefully and multiple measurements , to achieve accuracy ( by finding the average )
=> When drawing the best fit line in a graph , do not include points that seem to be out of the curve ,use a sharp and make the curve as smooth as possible , and remember to plot the independent Variable ( Temprature in a Time-of-reaction ( Y ) / Temprature ( X ) graph ) and NEVER forget to write the labels.

Tests
1.For Water:
> By adding anhydrous Copper(II) Sulphate , which will turn from white to blue.
> By adding anhydrous Cobalt(II) chloride , which will turn from blue to pink.

2.For unsaturated hydrocarbon ( Alkenes )
>Liquid : By adding Bromine water to it and shaking. (it'l go from Brown to colourless)
>Gas : By passing the compound through Bromine water. (Colour change = Brown to colourless)

3.For purity of substance
Solids => Test for melting point , if it is the correct value ( like the data says ) it is pure , if not, it is impure. e.g. Ice at 0 C°
Liquids => Test for boiling point , if it is the correct value ( like the data says ) it is pure , if not, it is impure. e.g. Water at 100 C°

COLLECTION TECHNIQUES:
=> upward delivery is for -> gases less dense than air (Hydrogen and Ammonia)
=> Downward delivery is for -> gases more dense than air (Carbon Dioxide
=> Displacement of water method -> insoluble gases ( Methane )


Fermentation:
=> Glucose and Yeast are used! (just rememeber that Yeat contains enzymes -> Biological Catalysts)
=> Suitable Temperature 37 degrees (Optimum for Enzyme)
=> Bung is used -> To Let Carbon Dioxide out, and prevent the entry of Oxygen.
=> Why is Oxygen's entry prevented (-> because it'l oxidize the alcohol to Carboxylic Acid and also it'l affect the anaerobic respiration)
=> Why does the reaction stop? -> Due to an excess in the conc. of alcohol, Yeast dies. Or Glucose finishes up!

Chromatography:
=> Draw a baseline with a pencil (pencil being insoluble) about 1-2 cm above the end of the chromatogram
=> Use a pipette to put a concentrated spot of dye on the paper
=> Dip it in a solvent (Water, if it's soluble in it otherwise an organic solvent e.g Ethanol)
=> the solvent level MUST be below the baseline
=> The solvent would start to rise up the paper producing a no. of spots (depending on the no. of dyes present in the substance)
=> Spray a locating agent for colourless dyes like amino acids or simple sugars
=> Or identify with RF value (formula = (distance moved by the dye)/(distance moved by the solvent)

Oxidising Agents!
=> KMn04 (V11) -> FROM PURPLE TO COLOURLESS!
=> K2Cr2O7 (VI) -> From Orange to Green!

=> All metals are reducing agents! (Mention the Group I metals, when asked)
=> Dehydrating Agents : Sulfuring Acid
=> Drying agent : Calcium Oxide


Ethene test: Add bromine water and bromine water will go colourless with alkenes (ethene) and it will remain orange for alkanes (ethane)

For precautions .. Tie your hair at the back .. Wear gloves .. Lab suit !

Universal Indicators:
Acid ( Red - Yellow) , Neutral ( Green) , Alkaline ( Blue - Violet)
Phenolphthalein: Alkaline ( Pink) For Strong ( Colourless) , Neutral ( Colourless) , Acid ( Orange)
Methyl Orange: Alkaline: ( Yellow) , Neutral ( Colourless) , Acid ( Red)
Bromothymol Blue: Acid (Yellow) , Neutral (Dark green) , Alkaline (Blue)

Here's a link to another great thread about ATP tips: https://www.xtremepapers.com/community/threads/chemistry-atp-tips.25439/

Correct me where I'm wrong and also post your own tips, I will add them to my post.
Remember me in your prayers and good luck.
 
Messages
169
Reaction score
0
Points
0
Add bromine water and bromine water will go colourless with alkenes (ethene) and it will remain orange for alkanes (ethane)
:D
 
Messages
1,594
Reaction score
483
Points
93
Wonderful! Thank youu! :D
Yes, no wonder.. He is A.M.A.Z.I.N.G. (literally)
 

XPFMember

XPRS Moderator
Messages
4,555
Reaction score
13,290
Points
523
Waalaikumassalam!!

wud like to gie a sugestion...post it as a word doc. as well..with all formatting i mean...it's more easier and better wen u see i wit different kin of colours and formatting and all tat :D

Anyways thanks a lot! Jazak ALlah Khair!! gud work! :)
 
Messages
646
Reaction score
39
Points
38
Math_angel said:
Waalaikumassalam!!

wud like to gie a sugestion...post it as a word doc. as well..with all formatting i mean...it's more easier and better wen u see i wit different kin of colours and formatting and all tat :D

Anyways thanks a lot! Jazak ALlah Khair!! gud work! :)
Just copy it and paste it in a word document :D
 
Messages
124
Reaction score
0
Points
16
thanx nibz..
this is a really gd example of a "short and sweet" set of notes..
perfect fr last minute revision..
thanx again.. :D :D
 
Messages
106
Reaction score
11
Points
28
Nibz said:
Hey guys, Assalam-o-Alaikum :)
These are some of the tips for Chemistry ATP (both O-level and IGCSE)

Some precautions:
=> Experiments involving poisonous gases like Nitrogen, Ammonia and Bromine -> Carry out the exp. in Fume Cupboard or in a well Ventilated Room.
=> Experiments involving heat -> Use a polystyrene cup for insulation to prevent heat loss! + Always take the same initial readings for better accuracy;
=> Experiments involving Acids, Liquids or Solids -> Always use the same concentration; Same Volumes; Same Surface Area or Same Masses exceptions are some variables!
=> Experiment involving Crystallisation -> Allow to cool SLOWLY and Use more water and more salt for better results!
SOME COMMON and USEFUL precautions for all experiments (use these when your mind is BLANK)
=> Repetition of the exp.
=>Taking Average > Put your tie in shorts
=> Use Goggles
=> Taking measurements carefully and multiple measurements , to achieve accuracy ( by finding the average )
=> When drawing the best fit line in a graph , do not include points that seem to be out of the curve ,use a sharp and make the curve as smooth as possible , and remember to plot the independent Variable ( Temprature in a Time-of-reaction ( Y ) / Temprature ( X ) graph ) and NEVER forget to write the labels.

Tests
1.For Water:
> By adding anhydrous Copper(II) Sulphate , which will turn from white to blue.
> By adding anhydrous Cobalt(II) chloride , which will turn from blue to pink.

2.For unsaturated hydrocarbon ( Alkenes )
>Liquid : By adding Bromine water to it and shaking. (it'l go from Brown to colourless)
>Gas : By passing the compound through Bromine water. (Colour change = Brown to colourless)

3.For purity of substance
Solids => Test for melting point , if it is the correct value ( like the data says ) it is pure , if not, it is impure. e.g. Ice at 0 C°
Liquids => Test for boiling point , if it is the correct value ( like the data says ) it is pure , if not, it is impure. e.g. Water at 100 C°

COLLECTION TECHNIQUES:
=> upward delivery is for -> gases less dense than air (Hydrogen and Ammonia)
=> Downward delivery is for -> gases more dense than air (Carbon Dioxide
=> Displacement of water method -> insoluble gases ( Methane )


Fermentation:
=> Glucose and Yeast are used! (just rememeber that Yeat contains enzymes -> Biological Catalysts)
=> Suitable Temperature 37 degrees (Optimum for Enzyme)
=> Bung is used -> To Let Carbon Dioxide out, and prevent the entry of Oxygen.
=> Why is Oxygen's entry prevented (-> because it'l oxidize the alcohol to Carboxylic Acid and also it'l affect the anaerobic respiration)
=> Why does the reaction stop? -> Due to an excess in the conc. of alcohol, Yeast dies. Or Glucose finishes up!

Chromatography:
=> Draw a baseline with a pencil (pencil being insoluble) about 1-2 cm above the end of the chromatogram
=> Use a pipette to put a concentrated spot of dye on the paper
=> Dip it in a solvent (Water, if it's soluble in it otherwise an organic solvent e.g Ethanol)
=> the solvent level MUST be below the baseline
=> The solvent would start to rise up the paper producing a no. of spots (depending on the no. of dyes present in the substance)
=> Spray a locating agent for colourless dyes like amino acids or simple sugars
=> Or identify with RF value (formula = (distance moved by the dye)/(distance moved by the solvent)

Oxidising Agents!
=> KMn04 (V11) -> FROM PURPLE TO COLOURLESS!
=> K2Cr2O7 (VI) -> From Orange to Green!

=> All metals are reducing agents! (Mention the Group I metals)
=> Dehydrating Agents : Sulfuring Acid
=> Drying agent : Calcium Oxide
I had to write this all TWICE ( because of this net) :( <= Always copy your post (once) before posting! (My advice)
Correct me where I'm wrong and also post your own tips here!
Topic is 'sticky' for a day.
Just pray for me!
And Best of Luck

For precautions .. Tie your hair at the back .. Wear gloves .. Lab suit ! Correction was required as for all fellow XPF people ! :)
 
Messages
15
Reaction score
0
Points
0
Nibz said:
Hey guys, Assalam-o-Alaikum :)
These are some of the tips for Chemistry ATP (both O-level and IGCSE)

Some precautions:
=> Experiments involving poisonous gases like Nitrogen, Ammonia and Bromine -> Carry out the exp. in Fume Cupboard or in a well Ventilated Room.
=> Experiments involving heat -> Use a polystyrene cup for insulation to prevent heat loss! + Always take the same initial readings for better accuracy;
=> Experiments involving Acids, Liquids or Solids -> Always use the same concentration; Same Volumes; Same Surface Area or Same Masses exceptions are some variables!
=> Experiment involving Crystallisation -> Allow to cool SLOWLY and Use more water and more salt for better results!
SOME COMMON and USEFUL precautions for all experiments (use these when your mind is BLANK)
=> Repetition of the exp.
=>Taking Average > Put your tie in shorts
=> Use Goggles
=> Taking measurements carefully and multiple measurements , to achieve accuracy ( by finding the average )
=> When drawing the best fit line in a graph , do not include points that seem to be out of the curve ,use a sharp and make the curve as smooth as possible , and remember to plot the independent Variable ( Temprature in a Time-of-reaction ( Y ) / Temprature ( X ) graph ) and NEVER forget to write the labels.

Tests
1.For Water:
> By adding anhydrous Copper(II) Sulphate , which will turn from white to blue.
> By adding anhydrous Cobalt(II) chloride , which will turn from blue to pink.

2.For unsaturated hydrocarbon ( Alkenes )
>Liquid : By adding Bromine water to it and shaking. (it'l go from Brown to colourless)
>Gas : By passing the compound through Bromine water. (Colour change = Brown to colourless)

3.For purity of substance
Solids => Test for melting point , if it is the correct value ( like the data says ) it is pure , if not, it is impure. e.g. Ice at 0 C°
Liquids => Test for boiling point , if it is the correct value ( like the data says ) it is pure , if not, it is impure. e.g. Water at 100 C°

COLLECTION TECHNIQUES:
=> upward delivery is for -> gases less dense than air (Hydrogen and Ammonia)
=> Downward delivery is for -> gases more dense than air (Carbon Dioxide
=> Displacement of water method -> insoluble gases ( Methane )


Fermentation:
=> Glucose and Yeast are used! (just rememeber that Yeat contains enzymes -> Biological Catalysts)
=> Suitable Temperature 37 degrees (Optimum for Enzyme)
=> Bung is used -> To Let Carbon Dioxide out, and prevent the entry of Oxygen.
=> Why is Oxygen's entry prevented (-> because it'l oxidize the alcohol to Carboxylic Acid and also it'l affect the anaerobic respiration)
=> Why does the reaction stop? -> Due to an excess in the conc. of alcohol, Yeast dies. Or Glucose finishes up!

Chromatography:
=> Draw a baseline with a pencil (pencil being insoluble) about 1-2 cm above the end of the chromatogram
=> Use a pipette to put a concentrated spot of dye on the paper
=> Dip it in a solvent (Water, if it's soluble in it otherwise an organic solvent e.g Ethanol)
=> the solvent level MUST be below the baseline
=> The solvent would start to rise up the paper producing a no. of spots (depending on the no. of dyes present in the substance)
=> Spray a locating agent for colourless dyes like amino acids or simple sugars
=> Or identify with RF value (formula = (distance moved by the dye)/(distance moved by the solvent)

Oxidising Agents!
=> KMn04 (V11) -> FROM PURPLE TO COLOURLESS!
=> K2Cr2O7 (VI) -> From Orange to Green!

=> All metals are reducing agents! (Mention the Group I metals)
=> Dehydrating Agents : Sulfuring Acid
=> Drying agent : Calcium Oxide
I had to write this all TWICE ( because of this net) :( <= Always copy your post (once) before posting! (My advice)
Correct me where I'm wrong and also post your own tips here!
Topic is 'sticky' for a day.
Just pray for me!
And Best of Luck


hey do you have business and physiics notes
 
Messages
19
Reaction score
0
Points
0
TheDealer said:
what do u mean by putting ur tie in ur shorts? :S

To prevent your tie ( if you are wearing shorts) To catch fire , if fire is applied to an apparatus
 
Messages
19
Reaction score
0
Points
0
Alsalamalikum

Could I ask , are the flame colours needed for Chemistry IGCSE

Thanks :)
 
Messages
1,594
Reaction score
483
Points
93
Nibz said:
Hey guys, Assalam-o-Alaikum :)
These are some of the tips for Chemistry ATP (both O-level and IGCSE)

Some precautions:
=> Experiments involving poisonous gases like Nitrogen, Ammonia and Bromine -> Carry out the exp. in Fume Cupboard or in a well Ventilated Room.
Umm, Nibz, nitrogen is not toxic/poisonous. Otherwise, we'll all be dead breathing 78% of nitrogen in air 24/7! :p
 

Nibz

XPRS Moderator
Messages
4,615
Reaction score
9,574
Points
523
babyzee said:
hey do you have business and physiics notes

Yes!! Check the attachments!

TatsuEG said:
Alsalamalikum

Could I ask , are the flame colours needed for Chemistry IGCSE

Thanks
No, they aren't!
 

Attachments

  • business Studies Notes.doc
    112.5 KB · Views: 89
  • responsibility.pdf
    184.8 KB · Views: 144
Top